FAQ

How can the entire Simera-C series be compatible with DJI Ronin 4D to focus?

Follow DJI’s official 4D tutorials to calibrate. If there is a situation where the focus cannot be achieved, try to increase the calibration points. This step usually helps the system better identify the target, thereby improving the accuracy of focusing.

Can the filter size of Simera-C be adapted to the 80mm standard matte box?

Yes. For Simera-C 75mm, the inner filter size is M62, and its outer front diameter is M67. For other focal lengths, the outer diameter is M62. All above lenses can be converted to 80mm diameter by using a 62-80mm or a 67-80mm adapter ring to fit in the 80mm matte box on the market.

Are all lenses shipped after focus calibration in the factory?

Yes, all lenses will be strictly calibrated and checked by DZOFILM Quality Control department.

Yes, all lenses will be strictly calibrated and checked by DZOFILM Quality Control department.

When not in use, please cover the front and rear caps of the lens;
● To prevent mold, store the lens and filters in a cool, dry place, avoiding direct sunlight, and do not place them with kerosene or camphor balls;
● Keep the lens dry. If it gets damp or has water droplets, please wipe it clean;
● Do not place the lens near a heater or other extremely hot places, as it may cause damage or deformation;
● When moving the lens from a cold place to an area with higher temperature and humidity, fog may form on the glass lens. To avoid fogging, allow the lens to acclimate to the change in environment before using it.

Why doesn't the correct aperture value display on the camera when the Simera-C series is installed?

Because the Simera-C lens has no electronic contacts, the value cannot be displayed on the camera.